|
Rust Remover Paper
Ace 322 is specially formulated to remove mild rust from ferrous and non-ferrous metals effectively by spray process. Ace 322 is purely based on phosphoric acid enriched with various types of solvents/surfactants and wetting agents, etc. Ace322 attacks only on rust or scales and it does not attack on the base metal.
|
a.
|
Colour
|
Colourless Liquid
|
|
b.
|
Chemical Composition
|
Blend of different types of acids with inhibitors, and emulsifiers etc.
|
|
c.
|
Odour
|
Slightly Pungent
|
|
d.
|
Foaming Tendency
|
Nil
|
|
e
|
Reliability
|
Good
|
|
f.
|
Handling
|
Avoid Skin Contact
|
|
g
|
Solubility
|
Good
|
|
h.
|
pH
|
Acid Range
|
|
i.
|
Toxicity
|
Nil
|
|
j.
|
Flash Point
|
Nil
|
|
k.
|
Pollution Hazard
|
Moderate
|
Product Operating Procedure
Fill the tank with water and add: Ace322 at the rate of 10% and mixed it thoroughly and raise the temperature to 35-45°C. prior to dip in Ace322 bath, components should be free from oil, grease, strength and spray time of Ace 322 can be increased if the components are heavily contaminated with heavy rust. After processing in Ace322), the work should be rinsed thoroughly in clean water and subjected to phosphate bath Ace322 bath can be maintained by simple titration and does not require any skilled labour or any chemical knowledge. Bath should always be maintained at operating level with recommended concentration freshly prepared bath acts rapidly but the action gradually decreases due to the accumulation of iron concentration in the bath. Increase the temperature at this stage accelerates the derusting action, but the temperature should be controlled and it should not go above 55°C.
|
